How to replace a broken toilet seat screw

1. First look at the shape of the toilet seat. There are V-shaped, U-shaped, round and square seats. Change a suitable toilet seat according to the shape.

2. You can take a picture and measure the size of the toilet or see what brand it is. Take this information to the toilet store and let the professional master identify it. After you get the material back, you can install it yourself.

3. Small accessories are critical to hold the toilet lid on the toilet. Two plastic brackets, two screws, two lower locking washers, two lower locking bolts and two decorative covers all fit in pairs.

4. Final Installation. Align the fittings with the screw holes on the holes, then tighten them with a screwdriver and install them slowly. Don't use too much force, it will easily cause the screws to be broken.

Method 1:When replacing the toilet cover, simply remove the fixing bolts on the back of the toilet to replace it. The installation can be done in the opposite direction. Most toilet seats come in a variety of sizes and only two bolts need to be adjusted for installation. But you'll also need to measure the toilet seat's dimensions, screw-hole distance, width and length, and then buy a new toilet seat to replace it!

Method 2:Find the screw caps, remove them with a movable hand, and install the new ones. Usually the location of the screw cap is not very good to find, some in the light, some in the dark. Unscrew the cap in the dark, place it on the side of the toilet tank and open the cap. Reach in with your hand and feel upward toward the tank, you should be able to feel it, but you can't see it.