Where is the drain hole of the refrigerator?

Drainage position: the drainage hole is on the back, and you can see a hole. The drain of the refrigerator is usually on the back of the refrigerator, which is easy to find and vice versa.

The main reasons for water accumulation in the freezer are as follows:

1. When food is stored, it will be directly put into the refrigerator if the temperature is too high without cooling. Hot air contains a large amount of water, and cooling in the refrigerator will cause a lot of condensed water, which is generated faster than the discharge speed and will cause water accumulation.

2. Opening the door too often leads to a lot of hot air entering the refrigerator. Hot air will produce condensed water in the process of condensation, and the production of condensed water is faster than the discharge speed, which will cause water accumulation.

3. The leaking hole on the back of the refrigerator is designed to drain the condensed water in the refrigerator. If the drainage speed is poor, check whether the leakage hole is blocked. When the power is cut off, use thin iron wire to dredge the water leakage hole. The drain hole of refrigerator is blocked, which will cause too much water in the refrigerator to flow into the room along the refrigerator door, resulting in water leakage in the refrigerator. The following is a practical method and skill.

Cleaning method

1. First take out the foreign matter at the entrance of the drain hole of the refrigerator, and then pour a small amount of water into the drain hole of the cup net to see if the drainage is smooth. If it is not unobstructed or unobstructed, it proves that the drainage hole is blocked.

2. Turn off the power supply of the refrigerator and use soft copper wire to pass through the drain hole of the refrigerator. About 1.2 meters is basically the end point. (depending on the height of the refrigerator) After passing through, use a cup to get clean water into the drain hole, and then the water will be smooth. When it can't get through, don't force your way in to avoid unnecessary losses.

Why does the refrigerator run water?

1. Reason 1: When food is stored, it is too hot and directly put into the refrigerator without cooling. Hot air contains a lot of water, and cooling it in the refrigerator will cause a lot of condensed water. The generation of condensed water is greater than the discharge speed, which will cause water accumulation.

2. Reason 2: Is the knob position of the thermostat normal? Sometimes when we are placing food, we accidentally turn the thermostat knob. I don't know that the normal thermostat knob position in the refrigerator in summer should be 4.

3. Reason for running water in the refrigerator 3: The drain pipe of the refrigerator is blocked and cannot drain water. There are 80% users running water in refrigerators and freezers for this reason. This is because the back wall of the direct-cooling refrigerator is closely attached to the evaporator of the refrigeration part. When the compressor unit works, the evaporator of the refrigeration part absorbs the heat of the refrigeration part, which reduces the temperature of the back wall of the refrigerating room and forms a uniform layer of thin ice or frost on the wall. But when the compressor stops working, the temperature rises slowly and the ice on this back wall will gradually melt. The normal working procedure is that the melted water flows along the drain pipe to the water tray outside the refrigerator, where it evaporates. However, if the drain pipe is blocked, water will naturally flow out from the front, which leads to our common situation of running water in the refrigerator.

Link to resource web page