What are the production processes of bathroom cabinets?

Bathroom Cabinet Process-"Selection, Cutting and Drilling"

Selection: Look at the color and age of the wood with the naked eye. According to the production quantity of this batch of bathroom cabinets, suitable materials are selected for different use parts. 1 Clean appearance and beautiful colors. 1 is used to make the surface part of the cabinet, and some defects and nodes of 1 need to be treated by special technology (for example, the node part can only be used in the bathroom cabinet after being filled with professional compensation materials). If deterioration, deformation and moth-eaten are found, they should be scrapped to ensure the quality of bathroom cabinets.

Cutting: according to the professional operation book (customized products according to specially drawn drawings) and specific tools, the materials needed in different parts are cut into different sizes.

Drilling: Pre-drill structural installation holes for wood with professional and precise bench drills and other professional tools. The next process is designed professionally to ensure that the installation holes are not visible on the surface of the installed bathroom cabinet.

Splicing: imported raw materials 1 at the mercy of battens. In order to make the side panel, door panel, bottom panel and other parts of the bathroom cabinet, it is necessary to go through the "splicing" process. Splicing is a 1 process, which emphasizes technology and manufacturing accuracy. Firstly, the selected and polished wood with the size of 1 is discharged into a specific mold, and then the spliced parts are coated with rubber sheets. At the same time, in the process of splicing, there are large surfaces, such as the bottom plate, which will be slotted by professional engineers according to the stress area and expansion and contraction coefficient to avoid the cabinet from being deformed in subsequent use (principle: rail joint, cement pavement slotting).

Bathroom cabinet technology-"paint cutting"

Polishing: The assembled cabinets are repeatedly polished by professional polishers, including plane polishers, irregular polishers, spherical polishers, irregular polishers and manual polishers. There are special classifications of primary polishing and fine polishing in the polishing machine, and the polishing wheels used are distinguished according to thickness and material.

Cutting: the plate that has gone through the previous process has been formed. But to become a part of the bathroom cabinet, it needs to go through the process of "cutting". This process requires extremely high precision, and the error between the parts of the bathroom cabinet is calculated in millimeters. Therefore, it is required to measure the spliced parts 1 time, and cut off the unqualified parts to meet the requirements of installation after painting. Sometimes, it is required to install all parts. (The size ratio of bathroom cabinets has been confirmed by designers and experts, and the appearance ratio and practical functions are guaranteed to reach a high level, so the style of 1 dansure will not change easily. )

Paint: professional polyester paint is adopted to ensure that it is insect-proof and waterproof in use requirements; Unique and generous colors are the crux of maintaining high-grade 1 in the market. It is divided into primer and topcoat, and 1*** needs 4 times. The function of primer is to close the pores of wood, fix color and remove wood thorns; Top coat can only be applied after the primer is dry. The top coat will eventually show the color of the cabinet, and it has also been waterproof and insect-proof. Painting takes a long time, and it is impossible to simplify the painting procedure to shorten the production time for personal quality, so the painting process of 1 bathroom cabinet takes more than three days. There are strict operating procedures in the painting workshop, especially in the topcoat workshop. Because the topcoat will be assembled after drying, it is required that there should be no dust in the workshop, and all workers in the topcoat workshop must wear masks.

Packaging: Assemble the parts with dry paint in a professional installation station, and check whether there is any problem with the size, installation and paint in the cabinet. After the assembly is completed, wrap it with plastic wrap and box it, and fix the carton with large wooden cases.