Edge sealing method of wooden floor

Edge trimming of wood floor is the last process of wood floor installation, mainly for the beauty and stability of the floor. The following are several common methods for edging and sealing wooden floors:

1. Corner wrapping: use a U-shaped strip to wrap the wooden floor at the corner. This method is simple and also suitable for right-angle rooms.

2.T-shaped edging: in a wide doorway or transition area, the edging of the wooden floor is fixed with T-shaped strips. This method is suitable for the transition between two different materials, such as wood floors and tiles.

3. Digging the edge: Dig a groove in the corner or doorway and embed the edge of the wood floor in it. This method requires certain woodworking skills, but the edge-closing effect is natural and will not protrude like a thong.

4. Invisible hemming: Install a special wooden floor hemming in the corner or doorway to make it flush with the ground, so there is no hemming. This method requires some professional installation techniques.

No matter which method is adopted, the following points must be paid attention to when grinding:

1. It is best to choose materials similar in color to the wood floor to ensure the overall beauty.

2. The wrapping must be closely attached to the wooden floor to avoid gaps, so as to avoid dust accumulation or damage to the floor when placing furniture.

3. Pay attention to measurement and cutting when edging to ensure that the length and width of edging match the wooden floor.

4. If fixing objects such as nails or screws are needed for edging, please make sure not to damage the wooden floor.

In a word, the edging of wooden floor is simple, but it is also an important link that can not be ignored in the decoration process. Correct selection and installation methods can ensure the beauty and stability of the floor.