Installation method of wood floor batten

Wooden floor layering is a kind of wooden decorative material, which is used to fix the wooden floor and the decorative place and make it more beautiful.

Ensure that the floor has been paved and leveled before installation; Measure or cut the bead size to fit the floor size; Clean the installation position, gently tap the position of the batten with a rubber hammer and align it with the floor height.

The steps are as follows: 1. Measure; Match the length of the batten with the length of the floor to ensure that the batten is consistent with the size of the floor; 2. cutting; If the beads are not long enough, use a saw to cut them into appropriate sizes; 3. installation; Tap the installation position of the batten with a rubber hammer to ensure that the floor and batten are in the same plane and compact down; 4. Fixed; Use nails or screws to fix the slats. In the case of different floor sizes, it may be necessary to drill holes at the ends of the wood strips and fix the wood strips with nails. If you use screws, you should drill holes to ensure that the wood does not crack; 5. paint; After the layering is installed, the paint with the same color as the floor needs to be painted on the surface to ensure that the layering fits perfectly and becomes a whole.

Note: During the installation of wood battens, be sure to be completely flush with the ground to avoid height difference. During installation, professional tools must be used to ensure the stable parting position. When fixing floors and slats, use appropriate materials and tools to prevent wood from being damaged or cracked. Finally, it is necessary to install the ends of the slats with suitable pipes or resin covers for subsequent maintenance. These operations can ensure the firmness, beauty and life of wood floor layering.