Fastening method of fish hook

1. First, fold the fishing line in half and leave a circle, as shown below.

2. Then take a fishhook and press the line on it, as shown below.

3. Next, go around the hook, that is, around the short line on the left. It's usually good to go around a few times, as shown below.

4. Next, after winding, pass the short wire through the circle left before, then hold down the threaded end and tighten the long wire, as shown in the figure below.

5. Finally, cut off the redundant part of that short line with scissors, as shown in the figure below.

Answer: The method of binding the fishhook is as follows:

1. Double-rope single knot method: First, overlap the fishing line into a double line and wind it into a circle, then put it into the hook, and finally put it back and tighten it.

2. Single-line single knot method: wind a single fishing line into a hook and tighten the fishing line.

3. Swing three-stage method: after the double line passes through the hook, make a butterfly rotation, and after circling the hook for three times, the line end tightens the fishing line.

4. Single-line and double-knot method: thread the fishing line into the hook ring and tie it tightly for three times.

5. Single-line four-section method: the fishing line penetrates into the hook to form a circle, and the tail end winds back to the first circle four times on the fishing line.

6. One-four method of single line: the fishing line penetrates into the hook, and it can be tightened once and tightened four times.

7. Auxiliary winding method: the intermediate which is not easy to slip out is used for stabilization, and the fishing line, intermediate and hook are reversely wound for four times.

8. Direct four-winding method: wrap the fishing line around the hook four times, and then tighten it around the intersection.

9. Double-thread butterfly winding method: it is mainly used for post-processing of broken fishing line, and the new line and the old line are tied twice.