Tutorial on the use of a pin-printer

1, first of all, the use of pinpoint printers is the ribbon, just like the cartridges of laser printers, except that the ribbon is in the form of strips, and the cartridges are used in the form of powder.

2, we will find that the side of each one will have these buttons, first of all, let's look at the white arrow pointing to the one that is to regulate the thickness of the paper, and the red arrow pointing to the one that is mainly to control the front or back of the paper feed, and the blue arrow pointing to adjust the amount of paper, fine-tuning the time to use.

3, the top of the pinpoint printer will have three small buttons, generally press the top of the instructions can be operated, some individual machines in the paper when you press the right button and then press the left side will come out.

4, in front of the gray area is to put the paper, the side of the adjustment, there is no quick way to do this only keep trying to position. Paper placed in the position must be close to the border line once put crooked then print out things will be crooked, if there is a grid, then it will be crooked more obvious, so be sure to put good.

5, the printer work must not open the front panel to avoid accidents.