How to install your own Yuba?

Installation steps of Yuba: 1. Determine the vent: determine the position of the shower gel vent on the wall. 2. Installation of ventilator: Pay attention to the distance from the center of the bath dew in 13m to the ventilator. 3. Determine the position of Yuba: the height from the ground is 2.1m-2.3m. When taking a bath, you must also pay attention to concentrating the light of Yuba on people's backs. 4. Wiring: unscrew the bulb of Yuba, then remove the spring and mask, then do a good job of wiring according to the wiring diagram and terminal marks, cover the terminal cover, and plug the remaining wires into the ceiling.

5. Ventilation pipe connection: put the ventilation pipe sleeve on the air outlet of the ventilator shell, then choose the appropriate direction to put the box of Yuba in the reserved position and stabilize Yuba at the same time.

6. Install the Yuba mask and light bulbs: insert the Yuba mask into the positioning slot, hook the spring and tighten all the light bulbs.

Precautions for installation of Yuba:

1, first determine the position where people stand in the bathroom when taking a shower. People have to face the shower head (shower head), and the upper back of the human body is where the Yuba is installed.

2. The reason why Yuba is installed on the back of human body is because the heat of Yuba can not only heat the air in the bathroom, but also directly radiate the heat to the back of human body. Because when taking a bath, people feel the coldest is their backs. Be careful that Yuba doesn't fit on people's heads.

3. Take the standing shower of human body as an example. If you use a bathtub, install a yuba around the bathtub. The bathroom has a large area, with the light of Yuba, which can have extra lighting.