What kind of drill is used to punch holes in porcelain?

You can choose a glass drill, which has strong impact and is suitable for punching all tiles. You can choose an impact masonry drill, which is suitable for flushing tiles. It not only has fast drilling speed, but also ensures that tiles are not broken.

When decorating, it is often necessary to punch holes in the tiles. So what kind of drill should be used to punch holes in porcelain? How to punch holes in tiles without cracking? Let's have a look!

What kind of drill is used to punch holes in porcelain?

1, glass drill can be selected, which has strong impact force and is suitable for punching all tiles. 2. You can choose an impact masonry drill, which is suitable for tiling, which not only has fast drilling speed, but also ensures that the tiles are not broken.

Tips: When punching a hole in a tile, you must first determine the position, mark the number, and then stick it with tape. Align the impact drill vertically to the marked point and start the impact hammer. Pay attention to the initial strength is not too big, slowly through the appropriate.

How to punch holes in tiles without cracking;

1, punching position

First of all, if you want to make a hole in the tile without cracking, you must choose the location of the hole, usually at the joint of two tiles or in the middle of the tile. Don't choose the edge of the tile, it is easy to crack.

2. Choose the right tool

When drilling ceramic tiles, you should choose appropriate tools, such as glass drills or emery drills, and never use concrete drills.

3. Control speed

When drilling ceramic tiles, pay attention to the rotation of the drill bit. At the beginning of drilling, the drilling speed should be low, and then slowly increase the rotating speed after the glazed surface of ceramic tile is drilled. When using the impact drill, the impact function should be turned off, and the speed should be low first.

Grind off a piece of tile glaze and punch through the tile layer at high speed.

4, control the brick hole size

When punching holes in ceramic tiles, we should pay attention to the size of brick holes, and first make a small hole obliquely. Then drill the hole thoroughly. If you want to drill a hole with a large diameter, you can turn out the marks on the tiles with a drill, and then drill a circle around the marks with a drill. In addition, in the process of drilling, in order to prevent the drill from overheating, it is suggested to fill the mineral water bottle with water, make a hole in the bottle cap, and water it while drilling to reduce the temperature of the contact part between the drill and the ceramic tile.

Summary: The above are the related contents of what drills are used for punching porcelain and what should be paid attention to when punching ceramic tile walls, hoping to bring help to friends in need.