Woodworking undercutting mnemonic summary

What is the woodworking undercutting mnemonic? What are some good mnemonics to remember? Not clear candidates hurry to look over, the following by me for you carefully prepared "carpentry under the material mnemonic is what" for reference, continue to pay attention to this!


Woodworking mnemonic

Carpenters look at the tip of the tip, the mason to look at the edge

"Tip" that is, the corner. There are a variety of angles used in the placement and making of ply racks, installing planer knives at cutting angles, making adzes, filing saw teeth, and making mitered tenons for furniture. The tip also refers to the quality of the operation of cutting shoulders and splices in the operation of carpentry mortise and tenon joints, which is used to measure the high and low levels of carpentry craftsmanship. Tenon joints are not only good or bad quality, but also reflect the woodworker's knowledge in turning samples, reading drawings, selecting materials, drawing lines and processing, as well as the level of operation. It can be seen that these corners are the key to carpentry skills.

Similar proverb: carpenters are afraid to touch, masons are afraid to look.

Long carpenter, short blacksmith, not long and not short is the stonemason

Description of the characteristics of different trades and processing objects. It also shows that carpentry ingredients and part of the process (such as through the length of the tenon, cabinet doors and drawers, etc.) to leave a certain margin, rather long than short, rather big than small.

Similar to the proverb: carpenters are not afraid of long, blacksmiths are not afraid of short.

One material, two lines, three eyes

The guidelines for measuring a carpenter's basic skills. It is to see that the planing material should be flat, smooth and square, the drawing lines should be accurate and correct, and the mortise and tenon holes should be square and perpendicular.

Crooked tree straight carpenter bent wood, carpenter to bend the stock straight, can become useful material. Carpenters need to be reasonable to choose the material, poor material clever use, improve the utilization of wood.

Carpenter's axe mason's knife, bachelor's baggage big girl's waist. These are not easy to touch, describing the craftsman's tools are not casually lent to others to use.

Big carpenter's axe, small carpenter's saw

Traditional carpentry is generally divided into three categories, there is the rough carpentry to build a house, also known as the big carpenters, there are furniture joiners, also known as small carpenters, and hoop barrels to make a pot called the barrels maker, also known as the round carpenter.

The story is about the basic skills of different types of carpenters. The big carpenter needs to cut round logs flat, and the axe and the skill of carrying it are the most important. Small carpentry doors and windows, furniture production pay attention to the correct tenon and mortise, tight stitching, which not only affects the appearance, but also related to the inner life and quality. It is common to use the quality of cut shoulder joints in mortise and tenon joints to evaluate the level of small woodworkers' craftsmanship. In planing, chiseling, sawing, chipping and many other operations, sawing is quite important.

The small carpenter's material, the big carpenter's line

Planing is the most important basic skill of the small carpenter. The carpenter draws the line based on the two big drawings of the material, and if the material on these two sides is qualified, the line can be drawn accurately afterward. Line accurate, in order to ensure the accuracy of the subsequent processing. The planing material is required to be straight, square and flat. One eye from one end of the material to look at the other end, such as a straight line is straight, the check is square, the view of the plane, ruler measurement, and the straight edge of the match. In this way, the material is considered to be qualified.

Big carpenter to line prevail. Line has a center line, horizontal line and size line. Beams, square pillars, purlins, rafters, etc., should first pop up the center line, including the head of the cross in the line and Shun body in the line, and then operate according to the center line. Construction sampling, large wood components line, but also pop up the level and other dimensions of the line. Big wood project with these lines is good construction. So the line is a large wood processing and construction operations in the extremely critical part.

Three years to learn the art, three months to make up the art, when to get out of the art, depends on your craft

Woodworker undercutting mnemonic

The wood is born from the trees, the key is whether it can be utilized or not. The experience of production practice, the production process requires precision; three parts of the material seven parts to do, the knowledge of wood in mind. The material advantages and disadvantages of the environment, according to the material with materials, soft and hard. Mastering the theory of learning more, practical observation of the application.

In order to do a good job of carpentry, better material, we must fully understand the material, to do more learning, more practice, more observation, the specific methods are as follows.

1, more learning. Is to learn the relevant theory of wood knowledge. Such as the classification of wood knowledge; wood construction characteristics; wood and woodworking carving related properties; wood identification and defect correction and so on.

2, more practice. That is, in the study of woodworking carving technology, not only to master the construction methods and techniques of processing pieces or crafts, but also must be repeatedly applied in practice knowledge of wood, a reasonable choice of materials, with the material, so that the production of finished products to do the work of technology performance is good, the quality of the material is used well.

3, more observation. That is, in practice, the advantages and disadvantages of various types of wood materials for comparative observation;. The wood grain of the wood in contrast to the observation; the wood of the wood thickness contrast observation; the color of the wood contrast observation; the shape of the wood grain contrast observation; the weight of the wood and other aspects of the contrast observation. Only in this way can the combination of learning and use to improve woodworking carving techniques.