How to DIY illustrations of small toys

Specific steps:

1, break the light bulb with a knife.

2. Remove the core from the bulb.

Wrap it in cloth and break it.

4. Now start to make a decorative pirate ship in the middle of the drift bottle and take two erasers.

Step 5 cut out the boat shape

6. After cutting, file it with a file.

7. Insert four pins into the rubber and combine the two pieces of rubber together. The pin should be inserted into the rubber.

8. After that, use toothpick needles to make sails. After inserting the pin into the toothpick, bend it with needle-nosed pliers and cut off the extra parts.

Sail (again) to the (left) bow

9. Sails and flags

10, cut the upper part of the sail, make a hole in the lower part and put it on the mast.

1 1. Pull out the crossbar of the sail and put on the flag. After putting the flag into the sail, fold it in half and stick it on it.

12, put the boat together

13, beauty, gel pen and correction fluid, white nail polish can be used instead of correction fluid.

14. The general appearance of the pirate ship has been made, and the bottle balls are filled with colored sand.

15, put the boat ornaments in the light bulb, and adjust the position with a stick, and the approximate appearance of the drift bottle will be almost the same.

16, seal the drift bottle and stick the base on it.