Hooking process of one-shoulder messenger bag

Before making, now search online for the making materials of the messenger bag, and prepare the materials first.

The first thing to do is the side, because it needs to be sewn, it is too thick and has been thinned, left and right sides!

The next step is to sew the side edges and the frame for subsequent sewing with the main body.

This is the effect.

The next step is to make a ring and sew it to the edge.

So far, the production of the side is basically completed, and then the main part is produced.

This is the sewing and polishing of the upper part and the main body. Because there is no photo of the buckle, I will skip it here. The next thing to do is to bond the sewing body and the side straps on both sides.

Here, it is necessary to show the contrast position between the side and the main body through editing after the side is completed. What is actually done is to sew the main body and the upper cover first, and then sew the side.

At this point, the main part is basically completed, followed by polishing and sealing of the edge.

There is no display of the production of suspenders here, because no photos were taken.