Installation method of American wood floor

American wood floor is a popular installation method of wood floor, which provides beautiful, practical and lasting ground coverage for family and commercial space. The following are the installation steps of American wood flooring:

Clean the foundation.

Before you start installing the wooden floor, you must clean and prepare the floor. Ensure that the ground is clean and flat, and there are no protruding nails, screws and other items.

Compacted ground

If the ground is not flat enough, you need to check it with a level, and then fill the cracks and potholes with mortar or cement. After filling, use vibratory roller to compact the ground to ensure that the ground is solid and flat.

flooring

Lay the wooden floor, set it, and determine the layout direction and texture. It is best to place the floor in an indoor environment with suitable temperature and humidity to avoid the floor from deformation due to humidity.

Install the floor

Prepare a nail and fix the edge of the board at the waist line near the floor. When installing the board, you need to tap it gently with a rubber hammer to ensure that the floor is installed firmly and tightly.

Handle floor interface

Fill the small cracks and gaps in the joints of wood floors with sealant, and seal the joints between walls and floors to prevent the invasion of dust and dirt.

Maintain the floor

Through the above five steps, the American wooden floor can be installed smoothly. In order to keep the floor beautiful and prolong its life, it is recommended to use professional floor maintenance products and maintenance guides to maintain the floor regularly.