Traditional Culture Encyclopedia - Traditional stories - How to catch snakehead with a pole?

How to catch snakehead with a pole?

Snakehead is an expensive fish, which has a lot of influence on its value and efficacy, so many fishermen like to catch snakehead. Here's how to catch snakehead with a pole. I hope you like it.

Skills of fishing snakehead with hand pole

First of all, fishing gear

Do you know what kind of fishing tools should be used to catch snakehead? The snakehead ate secretly and suddenly ate fiercely. The process of its prey is: first contain, then swallow or spit. This predation process is instantaneous. In view of the above characteristics, if you want to catch snakehead, you must have a targeted fishing tackle.

1) fishing rod

The 6.3-meter-long FRP rod produced in 1980s was used. Remove the original rod head and tie the processed pin to the top of the fishing rod, which is especially convenient for loading and unloading the fishing line. After this transformation, the fishing rod is particularly powerful when throwing fish.

2) Fish hook

Fish hooks can use snakehead hooks. In order to protect fish, manufacturers make them on the handle of hooks. Surgery? There are notches on each hook handle, and some notches account for 2/3 of the diameter of the hook handle, so it is easy to break the hook when fishing fierce snakehead. Try to choose those that only break 1/3 when picking the hook; Or weld the notch of the hook handle with solder to enhance the rigidity.

3) Fishing line

Snakehead has sharp teeth and can easily bite off the fishing line. I used a thick white nylon thread (dyed black), one end of which was tied to the circle of the hook handle. In order to prevent snakehead from biting the fishing line, I used a 5 cm rubber tube to cover the joint between the hook handle and the fishing line, which effectively prevented snakehead from biting the fishing line. Snakehead eats fast, so the fishing line should be made short and fast. The length of the fishing line should be 1? 1.3m is suitable.

Second, bait

Snakehead is a carnivorous fish, and its bait is mainly live loach and small white strip. I used the bait frog (available in fishing gear shop). The hanging method of the frog pays attention to piercing the rainbow door of the young frog with a fish hook, passing through the abdominal cavity, then stabbing the hook tip to the upper lip of the young frog, and then exposing the barb of the hook. When fishing, you should prepare more small frogs as bait. The little frog was bitten by a snakehead and should be replaced in time.

Third, when fishing

Snakehead has the habit of drying scales, and the sunny day in May every year is the vigorous period of snakehead drying scales. Sunny days 10 to 15, where 12? 14 is the peak sunshine period.

Fourth, the fishing place.

The snakehead basks in scales mainly in two kinds of waters: one is the junction of dense aquatic plants and sparse aquatic plants on the bank of Dangyang Reservoir and pond; Second, Chaoyang offshore 5? 6 meters of bright waters.

Five, fishing skills

Fishing snakehead should be hidden fishing, using walking fishing and point fishing. The snakehead is very alert and runs as soon as there is any movement. Therefore, when fishing snakehead, we must pay attention to the following points.

1) Don't wear white clothes, it's better to wear black and green, and camouflage clothes are the best.

2) Be especially vigilant when encountering grass, and stay away from grass 5? 6 meters, carefully observe whether there are snakehead scales in the grass, sometimes the head of snakehead is found first, and sometimes snakehead spits out a single bubble. When deciding whether to catch this snakehead, clap your hands and stamp your feet, and be especially careful. Put the bait gently in front of the snakehead's mouth for 30 minutes. At 40cm, move the bait rhythmically. At this time, there are two possibilities: one is that snakehead preys fiercely, so it needs to be quick-sighted and throw the fish that eats snakehead ashore; The other is being caught by the snakehead, causing big waves to escape.

3) When snakehead is drying scales in bright waters, sneak up on snakehead and put the bait in front of snakehead's mouth for 30? At 40 cm, it moves rhythmically, and some snake heads will pounce on the bait. At this time, snakehead will be thrown ashore. Some snake heads will dive into the water. At this time, it is necessary to patiently order bait continuously. Snakeheads want to occupy a favorable position and then hunt. If you catch 5? After 6 minutes, there is still no movement, and it is going to move.

Sixth, tips

1) In order to protect snakehead resources, it is best not to catch snakehead below 500 grams, even if it is caught, it should be released with the catch.

2) Every wheat harvest season, snakehead begins to lay eggs in dense grass. Snakehead eggs are frog's favorite food, so snakehead and frog can't live together. Whenever a snakehead sees a frog, it is bound to be eaten. Both male and female snakeheads have the habit of protecting their eggs. The behavior of snakehead protecting larvae moved the world, and a fishing proverb was specially set up for snakehead protecting larvae in the world. I advise you not to catch fish that scatter eggs, or you will lose your parents without protection. ? To convince future generations. Because snakehead is protected by parents from eggs to young fish, snakehead breeds rapidly and grows rapidly. At this point, we'd better? There is a car at home and a fishing rod in the warehouse? .

3) The snakehead is a fierce fish with sharp teeth. After catching snakehead, you must catch it carefully, and don't let snakehead bite your finger. In order to prevent accidents, it is best to take a bottle of wine and some cotton swabs with you, so as to deal with the wound in time after being bitten by a snakehead.

Fishing and pole lifting skills

In the process of fishing, we are very particular about lifting poles. If you can control it well, you can catch the fish, otherwise, you will let the fish run away in vain. Here are some of my experiences.

In our fishing, the pole lifting skills are divided into loose, straight, shaking and choking.

Song: That is to say, you should relax when you take in the line, and you can take in the line quickly when the fish's resistance is weak. If the resistance is great, loosen it immediately. If you are far-fetched, you will run away.

Straight: that is, when we take up the line, we should lift it straight up. Don't swing from side to side When a fish is in the water, its strength is several times its weight, and it has great resistance when it is closed. At this time, as long as you lift forward, you can bear the pressure. If you swing from side to side, it is easy to break the pole.

Shake: After the fish is hooked, it must be steady. Lift it up and shake it a little first, so that the hook can go deep. The hook is firmly hooked in the fish's mouth, which not only prevents the fish from spitting out the hook, but also reduces the error of sliding the hook when taking up the line. But you must gently shake the fishing rod, otherwise it will hook the fish mouth and unhook.

Choke: Just let the fish choke more. To a certain extent, in order to prevent the fish from struggling to escape, it is necessary to lift the fish head off the water and then quickly put down the water. Repeat it several times, then wrap it in a net, and it will be easy to put it away.

Matters needing attention in fishing with hand pole

When buying fishing rods, fishermen usually consider fishing waters and environment, as well as customary fishing methods and common fishing types. No matter what kind of pole you buy, you should pay attention to:

1. Length and weight. The length of the hand pole is closely related to the fishing waters, environment and fish species. In the freshwater pool

Fishing rod

Fishing, the commonly used rod length is 3.6~5.4 meters. Fishing rods of 6.3 meters and 7.2 meters can be used for fishing in far fishing spots. The components are light in weight;

2. Rod body. Require the whole pole to be straight and seamless; The rod wall is uniform, the thickness is consistent, and there are no insect eyes, hard wounds, cracks and scorch marks;

3. The mouth of the pole. When selecting a multi-section pull-out hand pole, it is required that the pole insertion place should not be too shallow or too deep. Take a five-paragraph character with a total length of 5 meters as an example: the insertion depth of the first paragraph is 4~4.5 cm, the second paragraph is 6~6.5 cm, the third paragraph is 7.5~8 cm and the bottom is 8.5~9 cm. No matter what kind of sheep, the joint must be closely engaged with the pole mouth after insertion. When checking the insertion depth, unscrew the protective cap at the bottom, take out each section and check it carefully to know its depth; Finally, insert the whole pole to see if it is straight: shake it by hand to see if the fluctuation range is the same.

4. stress. After the whole fishing rod is stressed, all sections are required to be evenly stressed and naturally bent. When buying, straighten each section of the fishing rod, tie a rope at the top of the rod tip, and drop it hard to see if the force is even. If the bending angle of a section is too large, it means that the fishing rod is unevenly stressed. If there is no dead bending, it means that the rod is evenly stressed. After detection and identification, put them into the sleeve rod in turn. It can pass smoothly when loading, which shows that each section is straight and even, and it is a good shot.

Main culture techniques of snakehead

When the larvae of snakehead just came out of the egg membrane, their individual development was still very incomplete, delicate and difficult to manage, as shown in the following figure:

① The snakehead seedlings are easily affected by waves and currents. And the gauze is dead;

(2) Living in groups at night is prone to death due to lack of oxygen;

(3) There is no scale on the body surface, and it is easy to be injured, infected with water mold and attacked by protozoa (rotifer, small melon worm, oblique tube worm, etc.). );

(4) When dead eggs and dead seedlings rot, a large number of harmful substances and oil beads are released, which pollutes water quality and environment. Therefore, when cultured in cages or incubators, fry can only be replaced in large cages or cultured directly in ponds after their feeding activities are normal.

Open feeding of fry

The open bait of black fry is small zooplankton (rotifer, small water flea, etc.). ), the individual size is controlled below 200 microns. Fertilization can be carried out in advance in the fry culture pond. If the number of zooplankton is insufficient, zooplankton caught with 100 mesh zooplankton net can be filtered with 40~60 mesh gauze, and the filtered filtrate contains a large number of small zooplankton. Add a small amount of oxytetracycline to the filtrate, let it stand for 30 minutes, and then feed it. Generally/kloc-0 is fed 6 times a day, that is, once every 4 hours. Take the principle of eating less and eating more. After 3-4 days, with the growth and fluidity of the fish, the feeding amount will gradually increase and the frequency will gradually decrease until it is fed twice every day at/kloc-0.

Eliminate cluster phenomenon in time.

Especially in 1~7 days after the release of the film, the aggregation phenomenon is more serious, which will cause hypoxia in some areas and cause dead seedlings. Therefore, it is necessary to gently stir the water with tools such as sea fishing to disperse the seedlings and improve the survival rate.

Strengthen water quality management and keep water fresh.

Remove dead eggs and seedlings in time to prevent rot from spilling over oil balls and producing poisons and oil films; Cages should be scrubbed and drained regularly. The cement pool should absorb and drain water regularly, and it is ideal to adopt micro-flow aquaculture. When raising seedlings in earthen ponds, water should be changed regularly, and the amount of water should be gradually increased. The temperature difference between fresh water and raw pond water is less than 2℃, and the water exchange rate is generally controlled at 60%~70%, which can be reduced to 30%~50% after two weeks. According to the change of water quality, the time and quantity of water change are controlled.

preventive measure

Fish fry are easily infected by water mold and protozoa (rotifer, cucurbitaceae, oblique tube worm, etc.). ) When they leave the membrane. After the fry are completely hatched, the egg membrane should be removed in time and sprayed with 15ppm formalin 1~2 times for prevention. It is best to disinfect the fresh water that is changed every day with 15 ~ 25mg/L quicklime or chlorine preparation in the storage tank in advance, and then use it after it is cultivated into tender green.

Timely separation and culture

After three weeks of culture, the fry can grow to about 2.5~3 cm. The fry of different specifications will kill each other, and the incidence will increase with the increase of relative density. Therefore, screening once every three weeks will gradually reduce the stocking density and evacuate to the fish pond according to the size.