Make slingshot-sized details

The whole process of slingshot making:

1, first draw a picture on paper and measure the dimensions of each part.

2. Contrast wood. (rosewood, fluff, rosewood)

3. Cut out the drawings.

4. Put the pattern on the wood and stroke it with a pencil.

5. Check whether the slingshot figure drawn below is standard.

6. Draw a few blinking points on the edge of the graph.

7. Turn around at the marked point.

8. Turn the eyes of the wood.

9. I walked to the vise and saw the wood composition along the turned eyes.

10, slingshot blank saw. The remaining wood is reserved.

1 1. Saw off the excess parts. Don't throw away the scraps, you can make other gadgets.

12, according to the pattern drawn by pencil in advance, use a powerful knife to make the wood into the shape of a slingshot.

13. Brush off the debris while grinding, and then check whether the grinding is in place.

14. File modification.

The original slingshot became popular in the 1970s and 1980s. Slingshot is a cold weapon or a game tool.

Slingshot is generally composed of bow frame, rubber band and leather bag. It is usually a "ya" shape made of branches. Rubber bands are tied at both ends of the rubber band, and a piece of skin wrapped in a projectile is tied in the middle of the rubber band.

The strength of the slingshot depends on the tension and rebound speed of the rubber band. The greater the tension of the rubber band, the heavier the projectile that can be matched, and the faster the rebound speed of the rubber band, which can provide a larger initial velocity for the projectile. The heavier the projectile, the higher the muzzle velocity and the greater the power. According to the launching mechanism, slingshots can be divided into bow slingshots and elastic slingshots. Bow slingshot has the most primitive bow slingshot and crossbow.

-