Traditional caulking agent

Of course, old tiles can also be sewn beautifully. Beautiful sewing agent is an upgraded product of jointing agent, and its decorative practicability is obviously better than that of color caulking agent. It solves the problems of unsightly and dirty tiles. The traditional sealant is coated on the surface of the sealant. The new caulking agent does not need caulking agent as the bottom layer, and can be directly added to the cracks of ceramic tiles after bonding. It is suitable for gap filling of more than 2mm, and the construction is more convenient than ordinary ones. It is an upgraded product of caulking agent.

Preparation before construction

For the treatment of joint of ceramic tile, shovel the joint of ceramic tile into a groove with a depth less than 2 mm, which is not only convenient for the application of joint filler, but also can avoid excessive wear in the future if the joint filler is stored in this groove. Then clean up the dirt with a small brush.

Beauty prescription

First pry open the mouth of the joint filler with a small awl, then put it on a glue gun and hit it along the brick seam. Immediately after punching holes in brick joints, scrape the sealant in brick joints with a scraper.

clear

The new sewing agent is quick-drying, and it needs to be cleaned quickly with a wet sponge when it is 10 cm, otherwise it will be difficult to clean it.

construction time

The surface is completely solidified within two hours after construction, and the construction surface can be used normally within 24 hours.