What's the difference between raglan sleeves and raglan sleeves?

The difference between raglan sleeves and raglan sleeves is that the shoulder line is different.

1, the shoulder line of clothes falls under the shoulders, and the body invades the sleeves, which is the rotator cuff.

2, raglan sleeves have no shoulder line, the sleeves are inserted into the neckline and the sleeves invade the body parts. It can be understood that the piece of the sleeve of the clothes is connected with the shoulder. For example, a common baseball uniform is raglan sleeves.

The plate-making methods of raglan sleeves are:

(1) First, complete the big figure, and make an initial sleeve according to the sleeve prototype drawing method on the basis of the big armhole. The big body is replaced by the upper body prototype. Take 1/2 of the sleeve hill as the sleeve fat parallel line, and two points intersecting with the sleeve hill arc line are set as counterpoint, measure the length from the sleeve bottom to counterpoint, and do counterpoint on the front and rear armholes to make the length from the sleeve bottom to counterpoint consistent.

(2) Put the front and rear sleeves at the armholes of the big body and remove the food intake. The front alignment points are 0.5 cm apart and the rear alignment points are 0.8 cm apart. This data is determined according to the requirements of the style and the activity of the arm, not a fixed number. The smaller the amount of arm movement, the closer the distance between two points, and vice versa.

(3) According to the style drawing, draw the dividing lines between the sleeve and the big body, the sleeve bottom and the armhole bottom of the big body, and draw the pay-off point to ensure that the sleeve arc and the big body arc are equal in length.

(4) The shoulder of the back sleeve is saved and transferred to the seam of the back neckline, and it is finished.