Deficiency and improvement of inspector

Deficiency and improvement of inspector

Inspector's deficiency and improvement, inspector's work is a special and very important work, so it is very necessary to do a good job summary. Let's introduce the deficiency and improvement of inspector.

Deficiency and improvement of inspectors 1 I joined _ _ industry and trade co., ltd on March 12, 2000, and was transferred to the bearing workshop to do quality work according to the company's needs. I am serious, careful and have a strong sense of responsibility and enterprising spirit, diligent and unremitting, and have great enthusiasm for my work; Cheerful personality, willing to communicate with others, good and skilled communication skills, strong teamwork ability; Strong sense of responsibility, able to complete the work assigned by the leadership.

Get along well with company employees and cooperate with department leaders to complete various tasks; Enterprising to learn new knowledge and skills, paying attention to their own development and improvement, getting familiar with the basic situation and related work of the company in a short time, and immediately entering the working state.

In the work of this department, I worked hard and was recognized by the leaders and colleagues of this department. Of course, I also made some minor mistakes and problems in my work, and the department leaders pointed them out to me in time, which promoted the maturity of my work.

Time flies, time flies, and 20__ years have passed in an instant. Looking back on 10, I worked as an inspector in the quality department of the company. There were many improvements, but there were also shortcomings.

During my one-year stay in the Quality Department, with the care and guidance of the leaders and the support and help of my colleagues, I not only completed my job diligently and practically, but also successfully completed all the temporary tasks assigned by the leaders, and improved in all aspects. In order to do a better job in the future, sum up experience and draw lessons, I will summarize the work in the second half of the year as follows:

1, study hard and learn new knowledge comprehensively.

Inspection work is a special post, which needs to constantly learn new knowledge and improve skills. In order to meet this requirement, we must attach importance to learning (learning new knowledge, learning new technology, learning new drawings, etc.). ).

2. Work hard to complete the above tasks.

After half a year, it is difficult for non-professional students to learn machining quality, but I have been making progress, meeting difficult challenges and completing the tasks assigned by the leaders.

3. Enterprising attitude in daily life and work.

Over the past year, I can consciously abide by the company's rules and regulations. At work, don't be late, don't leave early, take the initiative to ask for leave, respect leaders, unite colleagues, treat others sincerely and work hard.

I managed to do it:

First, self-discipline according to regulations. I will never do anything that the leader forbids. If the leader lets me go, I will try my best, and I will be a competent quality inspector without violating the rules and regulations.

The second is to use system self-discipline. I strictly abide by the rules set by the company. In terms of quality, resolutely do what should not be used, resolutely do not use it, and do not engage in humanism. I can also be aggressive in my own work, work hard to finish it, and be in place without being offside. In the work coordination with other colleagues in the department, we have achieved mutual understanding, mutual help, mutual learning and sincere treatment, established friendship and gained many useful inspirations. I know that behind the achievements, there are the efforts and struggles of all the staff in our quality department.

In the future, I will still treat extraordinary things with a normal heart, be bold and enterprising, and do everything well as always.

4, the main problems

Looking back at my own problems, although I can work hard and make some achievements, there are still many places that need continuous improvement and perfection. I have been working hard and trying to do better. Due to the lack of professional knowledge and work experience, the solutions to some problems are too simple and the working methods are too simple; Sometimes, we look at problems one-sidedly, and we are not calm enough to deal with some problems. On the basis of completing the tasks assigned by the leaders, we will give full play to our own advantages, continue to strengthen the study of professional knowledge, and further improve various inspection skills.

5, 20__ year work plan

In the new year, I am determined to seriously improve my business and work level and contribute my strength. Next, I will learn from other colleagues and colleagues with an open mind and learn good working methods; At the same time, in my spare time, I will try my best to learn business theory knowledge, expand the range of curiosity knowledge, and constantly improve my professional quality and level, so that my comprehensive quality can be improved to meet the development of the company and the needs of society. It is necessary to further strengthen the professionalism, enhance the sense of responsibility and improve the level of work completion.

I think I should try my best to do: First, according to the requirements of leaders, strengthen study and master mature technology; Second, broaden professional knowledge, participate in various inspector qualification training and examinations, and make yourself a qualified quality inspector as soon as possible; Third, seriously study and implement the "Quality Control System for Machining", work hard, understand the routine and temporary tasks arranged by the company, and finish them in time; Fourth, the inspection instruments should be operated correctly, cleaned in time, registered in time, and maintained daily; Fifth, love your job and continue to learn quality.

In short, state of mind determines state, and state determines success or failure! Have a sense of responsibility for the company, love for the society, perseverance for work, enthusiasm for colleagues and confidence in yourself! Be your best self.

Shortcomings and improvements of inspectors. 1. Morality, personal accomplishment and professional ethics.

In the past three months, I have conscientiously observed labor discipline, arrived at work on time and used my working hours effectively. Stick to your post, you need to work overtime to finish the work on time, and ensure that the work can be completed on time. Earnestly study knowledge; Have a strong sense of responsibility. Actively learn professional knowledge, have a correct working attitude and treat every job seriously and responsibly.

Second, the job and work ability

My job is a quality inspector, which is an important position to grasp the quality of products. I am well aware of my importance, and I said that I would do my job well with the goal of "doing my job better", and I would study hard to enrich myself after work. Although I will encounter many setbacks in my work, I believe in myself. There is a good saying, "Where you fall, you get up." I am still very young, and I believe that as long as I pay more than others, I will be able to make up for my lack of professional knowledge.

Third, summarize the work in the past three months.

Although I have made some achievements and made great progress, I still have the following shortcomings:

1, sometimes there is still a gap between work and leadership requirements. On the one hand, it is due to the lack of personal ability and quality, on the other hand, it is inefficient when the workload is heavy and the time is tight. At work, the sense of responsibility is not strong, a little sloppy.

2. Sometimes work sensitivity is not very strong. Not sensitive enough to the things assigned by the leaders, sometimes the work is not ahead of schedule and the report is not timely enough.

3, play in the work is not obvious enough. If you don't grasp the overall situation of your work well, you won't take the initiative to find a way ahead of time. A lot of work can only be considered average.

4. I still have many shortcomings in social interaction. Sometimes I can't say it in my heart, and I dare not say something. I have no courage and masculinity. I need the help of the leader when dealing with some things.

5, it is not careful enough in quality inspection, not enough professional knowledge, there are many things you know are wrong, but you can't say why. I was a little flustered during the inspection because I was not fully prepared before the inspection. I often pay attention to this end, but I ignore that end. I'm a little top-heavy, and I can't carry out systematic work in all directions.

IV. Future work plan

1, I will further develop my advantages, improve my shortcomings and do my best to do my job well. We should maintain a good mental state and carry forward the spirit of hard work, advancing despite difficulties, striving for perfection, being rigorous and meticulous, being proactive and "daring to fight". Clear up work ideas and improve work efficiency.

2. Before inspection, I must know the items, inspection methods and technical requirements to be inspected. In order to make preparations in advance in the inspection and inspection work. And should be prepared in advance before the inspection, and carefully supervise and inspect.

3, do a good job of supervision in the process of inspection, timely find and correct the problems existing in the process of inspection. Track and inspect the production and whole process of high-quality processing technology to ensure that each process is qualified. Strictly control the quality of production workpieces to avoid quality problems.

I cherish this job very much. In the past six months, I have learned a lot and realized a lot. Seeing the rapid development of the company, I am deeply proud, and I am more eager to be a full-time employee here, realize my goals, reflect my life value and grow together with the company. Here, I apply for becoming a full member, imploring the leaders to give me the opportunity to continue to exercise myself and realize my dream. I will do my job with humility and full enthusiasm, create value for the company, and look forward to creating a better future with the company!

Inspector's deficiency and improvement 3 Time flies, time flies, XX years passed quietly.

XX years is an important turning point in my life journey. Leaving school and stepping into the society, my life has a new starting point, a new beginning and a new goal. Lanshan Tunhe New Materials Co., Ltd. gave me a practical opportunity to apply theory to practice. During my work, my colleagues take good care of me and often give me encouragement and help. I will summarize my work in these months as follows:

First, the work harvest

In the past few months, as a quality inspector, I have carefully studied the company's quality management control process, and according to the requirements of my job responsibilities, I have got the following points:

1, sampling and storage of raw and auxiliary materials

I strictly follow the management requirements of the company and don't miss a lot. Understand the physical and chemical properties of various raw materials and store them reasonably.

2. Specimen inspection

Inspection is a fine inspection process. "Details determine success or failure". I do every experiment well with a rigorous working attitude during the experiment. At present, I have mastered the inspection methods and steps of all raw materials. Thanks to my master and my colleagues, you taught me this.

3. Data processing

When recording data, I record, summarize and report every experimental data based on the principle of "seeking truth and being pragmatic". Make no mistakes and make false reports.

Second, feelings and experiences.

1, attitude is everything.

You must be meticulous in your work. You can't always make mistakes. If necessary, check the results of your work to make sure that your work is foolproof. After work, we should always sum up work experience and lessons, constantly improve work efficiency and sum up work experience.

Although I will make some mistakes in my work and be criticized by my leaders, I don't think this is a shameful thing, because I think these mistakes and criticisms can help me avoid similar mistakes in my future work and make me grow faster in my work. During working with you, I was deeply impressed by their rigorous and serious work style, and I also learned a lot from them that I lacked.

2. Be diligent in thinking

The daily work of the post is complicated and boring in a few days, which requires us to be diligent in thinking, improve working methods, improve work efficiency and reduce working hours.

3. Keep learning

I should constantly enrich my professional knowledge and skills, which will make my work more handy.

If a person wants to make a difference in his post, he must be familiar with the professional knowledge of the post and broaden his knowledge in continuous learning. I am like a blank sheet of paper. I just entered the company and said nothing. Up to now, the handwriting on the paper is neat. Leaving school, my unit is Class Two. There is no end to learning, and work is another way of learning. After several months of laboratory study, I have now reached the working level of a regular employee.

Third, its own shortcomings.

1. Occasionally I will make mistakes in my work because of carelessness, which will bring unnecessary trouble to my work. In the future, I will finish my work seriously with a rigorous working attitude.

2, because of personality reasons, others are not active enough. In order to complete the work more perfectly in the future, I will take the initiative to communicate with my leading colleagues. I hope to learn from them what they can't learn in textbooks through conversation.

Since I left school and stepped into this historical stage, I feel this society is very strange for the first time. Whether it's work or interpersonal relationship, everything is very difficult for me, a novice. After these months of baptism, I really grew up a lot.

The end of XX years and the arrival of XX years are both the beginning and the end. What is displayed in front of me is a fertile ground for me to gallop, and I clearly feel the heavy responsibility. In my future work and life, I will continue to study, practice deeply and improve myself constantly. I will not live up to the opportunity and leadership that Blue Mountain Tunhe gave me, and the cultivation of my colleagues. I will grow up with Blue Mountain Tunhe.