Heating report stop and then resume how to pay the heating bill stop heating and then resume how to pay the heating bill

Introduction: In the winter in the north, people are not afraid of cold with heating. But some friends stop heating and then want to resume heating, but do not know how to operate. So, stop heating and then resume how to pay the heating bill? How to pay the heating bill when the heating is reported to be stopped and then restored? Here is all the relevant information I have provided!

Stop heating and then resume how to pay the heating bill

Stop heating and then resume as long as the application in advance, after the application is approved, you can pay the heating bill. Residents who want to suspend or resume heating can apply in writing. The application should, in principle, be made before September 30 of the current year, and the heating unit should sign an agreement on the suspension and resumption of heat supply and pay the basic fee for heating facilities. Suspension of heat supply period should in principle for the entire heating period and at least one heating period.

Among them, with a separate heating system type of user, suspension of heat supply, heating unit is appropriate to **** with heating facilities and user heating facilities completely disconnected. Do not have a household independent heating system type of users, there is a suspension of heat demand and by the heat supply unit to assess the conditions in line with the suspension of heat supply, the heat supply unit should be for the suspension of heat procedures, and take appropriate treatment to suspend heat. Do not meet the conditions of the suspension of heat supply, heat supply units should inform the user in writing of the reasons.

The draft for comment, in particular, the suspension of heat supply may cause security risks or affect the normal use of heat by others, shall not be suspended for heat supply.

If you want to suspend the heat supply, the user needs to first "clear". The draft proposed that the heating unit agreed to the user's application, the user needs to clean up their own heating facilities around the obstacles, obstacles also include renovation, etc., by the heating unit of the heating system to take measures to suspend or resume heat supply. Suspension and resumption of heating generated by the labor and material costs borne by the user, the heating unit needs to provide the user with a breakdown of the relevant costs.

During the period of suspension of heat supply, the heating unit does need to enter the home to check the disposal, the user should cooperate.

Floor heating maintenance method

1, the initial use of heating to be gradual;

The use of geothermal flooring, consumers must pay attention to the gradual heating of the floor and floor. When installing, the surface temperature should be kept at about 18℃. Before installation, the concrete floor should be gradually warmed up, increasing by 5°C every day until it reaches the standard of about 18°C.

Continue to maintain this temperature for the first 3 days after installation, and only warm up as necessary after 3 days, and only by 5°C per day.

When using geothermal heating for the first time, note that the temperature should rise slowly. The first time you use, the first three days of heating to gradually warm up: the first day the water temperature of 18 ℃, the second day 25 ℃, the third day 30 ℃, the fourth day before the normal temperature, that is, the water temperature of 45 ℃, the surface temperature of 28 ℃ ~ 30 ℃. Can not warm up too fast, too fast, the floor may be due to expansion of cracking and twisting phenomenon.

When the geothermal heating system is activated again after a long period of time, it should also be warmed up strictly according to the heating program as it was used for the first time.

2, the surface temperature can not be too high;

It is important to note that the use of geothermal heating, the surface temperature should not exceed 28 ℃, the water pipe temperature can not exceed 45 ℃, if more than this temperature, it will affect the service life of the floor and the use of cycle. General family, winter room temperature of 22 ℃ or so, it has been very comfortable, normal warming, it will not affect the use of geothermal floor.

3, close the geothermal system, pay attention to cooling to be gradual;

With the passage of the season, when the weather warms up, the indoor no longer need geothermal system heating, should pay attention to the closure of the geothermal system to have a process, the floor of the cooling process should be gradual, can not be sudden drop, if the cooling rate is too fast, it will also affect the service life of the floor.

At present, there are four ways to clean the floor heating:

Method one: pulse wave physical cleaning

This method is more comprehensive cleaning, but also more affordable. This method is not necessary to disassemble the tube is very convenient,

Method two: projectile cleaning

This method is a more complex program, you need to disassemble the tube, but the cleaning is relatively clean.

Method 3: chemical cleaning

This is a more common way to clean the inner wall of the pipe will not cause harm.

Method 4: manual filter cleaning

This is a traditional cleaning method, to open the filter, and then clean the filter. The cleaning process may be more laborious, but compared to the first three, it requires the lowest cost. When the filter is found to be broken, we can replace it in time.

The above four ways of cleaning underfloor heating can be chosen according to your actual situation. Regular underfloor heating cleaning can ensure more ideal heating effect in the coming year ......