3d bamboo weaving techniques

3d bamboo weaving production skills are as follows:

1, in strict accordance with the 2~3 years of the prime of the original bamboo (after maturity of the bamboo is relatively hard and has the toughness of the bamboo weaving objects will not be moldy, insect moths, cracking. Need to choose the shade of the original bamboo: because the shade of the original bamboo growth environment is suitable, section longer and thicker for the later production.)

2, remove the surface of the original bamboo bamboo green, the original bamboo growth process will appear some spots, stains and so on, scrape off the bamboo green, the later works of more uniform tone, more durable, in the scraping of the green you can easily determine the good and bad bamboo, such as: there are dark wounds, insect moths and so on will be discarded.

3, will scrape the green good bamboo, with a broken gabion knife according to the bamboo thickness ratio into a suitable number of equal parts.

4, will be divided into good bamboo in the sun to dry 10 ~ 15 days, to remove moisture, in order to prevent mold, cracking.

5, remove the excess bamboo joints part, further screening, such as damage to the original bamboo can not be used, to ensure that the later weaving works feel more intimate, beautiful.

6, will be divided into good bamboo wire with bamboo clamps (to prevent injury to the hand), placed on the even knife from end to end of the uniform force, gently drawn out by hand, repeated several times, can become silk. Layers of screening, a hundred pounds of bamboo eight two silk.

Weaving process can be roughly divided into the bottom, weaving, lock mouth three processes. In the weaving process, the main warp and weft weaving method. On the basis of the warp and weft weaving, can also be interspersed with a variety of techniques, such as: sparse weaving, inserting, wearing, cutting, locking, nailing, tying, set, etc., so that the pattern pattern varies.