How to install the rear stereo in my house?

Audio is a complete system, including player, processor, amplifier, speaker and related connecting wires.

The speaker is only a part of the output signal of the power amplifier.

Audio installation is determined according to the types of different equipment. Generally speaking, the output of the sound source is connected to the input of the power amplifier, and the output of the power amplifier is connected to the speaker.

Let's look at the front panel of the interface and the front panel of the back panel. There are two small round holes on the front panel, one for receiving audio (green) and the other for receiving microphone (pink).

There are many faces on the back panel. If you don't look at anything else, there are three in the bottom row or six in two rows (because there are two kinds behind the computer). Today we will take a row of three as an example. Like the front panel, there are two holes, green and pink, which are also audio and microphone. Whether the stereo is plugged in the front or the back, it is plugged in the green hole. Leave the rest alone.

Let's just say this one-on-two There are four holes on the right, and the top two are circled with white boxes and written with INPUT/ input. These two are plugged into the wire connecting the computer. The two white boxes below are circled with the words OUTPUT/ output and connected to the two tweeters of the stereo. Just connect it and turn on the audio power.

INPUT/ input will be written on the side, and the other end will be connected to the green hole on the computer.