Does the fishing hook need to be connected to the main line? What is the binding method of the secondary line and the main line?

Preparation tools: according to the specific situation, prepare the main line and auxiliary line of appropriate models, and prepare the eight-character ring for connection. Connecting the main line: first pass the main line through one side of the eight-character ring, and then wrap the shorter side at least four times. Then pass the short side through the folded position with the splayed ring and tighten it. Connecting the sub-wire: thread the sub-wire through the figure-eight ring, wrap the knotted end, and then thread it into the figure-eight ring. The position of the knot is beyond the position of the ring. 1. Does the fishing hook need to be connected with the main line? Both the secondary line and the main line are important tools to be used in fishing. They belong to fishing lines and play a very important connecting role. When preparing these tools, besides preparing them separately, there is also an important aspect that they are connected in the right way. In other words, when fishing, the main line and the secondary line are connected together and play a synergistic role. Functionally, both are important.

When connecting, the general way is to use the eight-character ring. This tool is a special tool, which is specially used to connect fishing gear. Connecting the main line and the secondary line is the most common practice. Moreover, the eight-character ring is relatively firm when connected, and it is not easy to detach. Therefore, when connecting, it is best to prepare this tool first, and then carry out the connection step.

Second, the method of tying the hook line to the main line has been introduced above. When fishing, you need to connect the main line and the auxiliary line together. At this time, you can connect a relatively easy-to-use tool-the eight-character ring according to the following methods:

1. preparation tools: it is necessary to prepare suitable model main lines and auxiliary lines according to the surrounding fishing environment, and at the same time, it is necessary to prepare eight-character rings that play an important role in connection.

2. Connect the main line: First, you need to connect the main line to the eight-character ring. First pass the main line through one side of the eight-character ring and then around the shorter side. In order to be firm, wrap it at least 4 times. After winding, the short side should pass through the position where it is folded in half with a figure-eight ring, and finally tighten it.

3. Connecting the branch line: After connecting the main line to the eight-character ring, it is necessary to connect the branch line to the eight-character ring. The connection mode is basically the same as the main line. Thread the sub-wire through the figure-eight ring, wrap the knotted end around the sub-wire, and then thread the sub-wire into the figure-eight ring. After passing through, pay attention to make the position of the knot exceed the position of the ring.