Where is the installation location of air-heated Yuba, which is more suitable for the installation method of Yuba?

Yuba is a common bath product in our daily necessities, which brings great convenience to our lives. For northerners, since the Yuba, they can take a bath comfortably even in the cold winter. After renovation, Yuba will be installed at home. Installing Yuba is also a technical activity, but before installation, let's take a look at where the air-cooled Yuba is installed. Let's explain it to you by the small series of lightning home repair network.

1. Where is the air-cooled Yuba installed?

1, the first is to determine the bath time. First, we need to determine where people usually stand in the bathroom. Generally speaking, people need to face the shower head (mainly shower head) when taking a bath. At this time, the upper part of the human back should be the position of the Yuba device.

Everyone must know that Yuba is located on the back and upper part of human body. Besides the heat of Yuba can stop heating the air in the bathroom, another reason is that Yuba can directly radiate heat to the back of human body. Because when taking a shower, it is the back that makes people feel colder. Be careful that Yuba doesn't fit on people's heads.

3. Of course, the position described above is taking a standing shower of human body as an example. If you use a bathtub, the bathtub is used as a yuba. A bathroom with a large area can have another kind of lighting with the lighting of Yuba.

Second, the installation method of air-cooled Yuba

(1) Installation-Wiring (wire):

1. Generally, four groups of wires (two groups of lamp heating, ventilation 1 group and lighting 1 group) are required to be composed of five wires (with 1 zero wire at the top, four control fire wires at the lower switch and 1 fire wire at the lower switch).

2. Air-cooled Yuba (PTC ceramic heater) needs five groups of wires, namely, lighting 1 group, ventilation 1 group, PTC heater 2 groups and negative ion 1 group internal circulation blower.

(2) Installation of air outlet: an air outlet is needed to suck out indoor air. The diameter of the air outlet is generally 10CM, which should be opened before the ceiling.

(3) Reservation of installation opening: Generally, the opening of Yuba is 300*300, and some Yuba openings are around 300*400. According to the different node plates, the requirements and methods for reserving installation holes are also different:

1.300*300 or 300*600 aluminum gusset ceiling: only one 300*300 gusset plate is left for installation.

2. Strip aluminum battens, it is best to confirm the opening size of the Yuba when installing the gusset plate, leave installation holes when installing the gusset plate, and prepare two stronger battens with larger span than the main keel of the ceiling on the crane for installing the Yuba.

3. Plastic gusset plate, basically the same as above.

4. For the waterproof gypsum board ceiling and sauna board ceiling, please confirm the position of the keel and the size of the installation opening of Yuba when installing the gusset plate.

Yuba is a widely used product, and with the development of the times, its utilization rate is getting higher and higher, especially in cold weather, which brings great convenience to everyone's life. As for the installation location of Yuba, it depends on the actual situation of the house. After learning the installation method of Yuba, you can also install it yourself. Want to know.