How to pull the rope on the road cutting machine

1. First, unscrew and remove the three bolts that fix the startup disk on the machine body, and rotate the machine body to disengage the startup disk.

2. Secondly, turn the opening of the starting reel upwards to untie the remaining knots or rope segments on the plastic rope winding reel.

3. Finally, the starting rope to be installed is burned with an open flame at the end of the rope winding disc, and then a thin wire or fine iron wire passes through the rope hole of the plastic rope winding disc, and the plastic disc is rotated to align the rope hole with the rope hole of the iron disc of the starting disc, so that the thin wire or fine iron wire passes through the rope hole of the iron disc.