The door lock installation is not complicated, and the door lock installation process is detailed.

The door is an indispensable building material in the house, and the door lock is the guarantee of people's safety. In order to ensure the safety of family members and personal property, it is very necessary to install door locks. The installation of the door lock must ensure the quality. If the installation is not in place, the safety of the room cannot be guaranteed. Bian Xiao Bunny? Let me introduce you to the detailed installation process of the door lock.

The installation of the door lock is not complicated. Explain the installation process of the door lock in detail.

Door lock installation process

1, read carefully the hole type and precautions of the lock body hole, and carefully cut the distance from the door frame to the center of the handle before digging. For 70mm, check whether the thickness of the door is between 40mm and 55mm.

2. The size and position of the opening must meet the standards of the opening drawing. If the opening is too small, it will easily lead to the deformation of the circuit board of the door lock, which will lead to the failure of the door lock to work normally after installation, leading to the phenomenon that we should be careful when opening various types. It is impossible to open this hole or door. If the opening is too big, the lock will not cover the hole, which will seriously affect the overall appearance.

3。 After opening the hole, the actual door lock should be used to test whether it is suitable, especially if there is a small groove on the oblique tongue. After the lock body hole is opened, it is necessary to clean up the sawdust inside, and then insert the lock ring into the lock hole to test whether the hole position is normal. It is normal to be nervous. Enter the lock, otherwise it will affect the function and service life of the lock.

4. Opening the lock core is the most important part in the installation and use of the whole door lock. If the hole position is not good, it will directly affect the use and performance of the whole lock. Test the oblique tongue from different directions to see if it can be completely ejected, and the wood corresponding to the oblique tongue is slightly concave. Fix it with screws, and pass the switch wire and motor wire of the lock core through the inside of the entrance.

The installation of the door lock is not complicated. The installation process of the door lock is introduced in detail.

There is no plan to install door locks. It determines the safety of people's living environment. The above is the introduction of the door lock installation process. I hope this article is helpful to you. If you still don't understand, you can pay attention to our Tuba rabbit, which will provide you with more complete, detailed and updated information.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~