Cutting method of solid wood flooring

Solid wood flooring is a high-grade, environmentally friendly flooring material that is commonly used in home renovations and commercial premises. When laying, it is often necessary to cut the floor to fit the size and shape of the room. The following is an introduction to the cutting method of solid wood flooring.

One, cutting tools

There are many kinds of cutting tools for solid wood flooring, including manual saws, electric saws, German Yupei saws, circular saws and so on. Among them, the electric saw and German U Pei saw is more commonly used. The power saw can quickly and accurately complete the cutting work, suitable for large areas of flooring. The German U Pei saw is a manual saw, simple operation, versatility, suitable for cutting fine floor.

Two, cutting preparation

Before you start cutting solid wood flooring, you need to do some preparatory work. First, the floor needs to be leveled on the platform so that its surface is facing up. Second, the cutting line needs to be marked on the floor with tape or pencil for subsequent cutting operations. Finally, you need to measure the distance from the cut line to the edge of the board to ensure that the cut floor is the correct length and width dimensions.

Three, cutting operation

1, electric saw cutting: put the floor on the platform, install the electric saw, and adjust the depth of the saw blade. Then, place the saw blade on the cutting line and press the power switch to start cutting. In the cutting process, pay attention to keep the saw blade perpendicular to the floor surface, so as not to cause too much damage to the floor. After cutting, you can use a file or sandpaper to trim the cutting surface.

2, Germany Yupei saw cutting: put the floor on the platform, use tape to fix it on the worktable. Then, use a ruler to measure the distance from the cutting line to the edge of the board, put the sharp teeth of the U-Pei saw on the cutting line and force the head of the saw into the board. Then push and pull the Yupe Saw along the direction of the teeth according to the cutting line and cut gradually, taking care to keep the strength and speed consistent. After cutting, use a file or sandpaper to trim the cutting surface.

In short, solid wood flooring cutting methods and tools need to be selected according to the specific circumstances, to ensure that the cutting is accurate, facing the perfect.