How to make environmentally friendly lanterns?

----- creative environmentally friendly children's lantern system Need to prepare materials: 1, the market sold square large BaoTe bottle a (square than round easy to cut). Large Coke bottle can also be.　　2, microphone pen (you can freely choose your favorite color, but the selected color should not be too light, because it is transparent material, the color is too light to show the color).　　3, a cotton thread (used to fix the lantern with a small light bulb tube).　　4, go to the bookstore to buy lantern special bulb tube (ranging from 15-30 yuan). Because the Bowtie bottle is afraid of heat, so it is not suitable for candles, it will be deformed.　　5, a craft knife.　　6, Polaroid ball, colorful silk thread several (final decoration).　　Production method: 1, the top half of the bottle (1/3 cut), children ask parents to help cut!　　Note that at the end of the cut, you must use your hands to press each side of the cut in order to fix the shape.　　Choose a four-sided Pottle and cut off the top 1/4 of the bottle.　　2. Divide each side into four equal parts (vertically) and use a craft knife to cut from the top 1/5 to the bottom 1/5.　　Compose and then cut and press the shape.　3、Ask the children to draw their favorite pattern, preferably a large one.　　4、Color with the microphone pen. (You can also choose to use oily pen, oily is easier to color but no sense of transparency; with a microphone pen or color is not easy to color, but the sense of full transparency, color pens need to be on the color of two color color that is completed) 5, in the top of the opposite side of the drill a hole in each, the children ask their parents to help Oh!　　6, with the prepared cotton thread to wear a good fixed.　　7: Please ask your parents to help you drill a hole in the center of the bottom.　　8、Decorate your lantern with the prepared polypropylene balls and silk thread. (You can decorate it the way you like.)　　Finished product 9, put on the lantern special light bulb tube, a unique lantern is completed!　　------------------------ small lantern handmade DIY practice Materials: cardboard, paper cutter, ruler, pencil, double-sided tape, string.　　Steps: 1, prepare a rectangular red cardboard (I am using an old expired calendar card) Do it yourself beautiful little lantern. 2, will leave 0.5 ~ 1.0cm on each side of the cardboard, according to the equal parts of a number of parallel lines, and then cut with a paper cutter. 3, rolled a little so that the cardboard is curved. 4, to the paste, the edges of the tape.　4, the paste, the edges of the material cut into thin strips for the spike, and then paste the line of rope Do it yourself beautiful little lantern 5, ah! Beautiful small lantern is done -------------------- handmade lantern production method, how to make lanterns The first step, make the skeleton. Paper lanterns are relatively simple shape is a cube or cylinder, the best choice can be bent bamboo branches or bamboo skin built into the frame, articulated with a thin line tied. If you can't find, long thin strips of cardboard and barbecue bamboo sticks can also be used, the degree of solidity and flexibility will be lacking, but placed in the interior is also a very good decoration.　　Step 2: Make the lamp body. Buy a few sheets of white or red rice paper or gilded rice paper at a store, cut them to fit the lantern's skeleton, and then you can design your own pattern. Calligraphy, painting, and paper-cutting can all be displayed on the small lanterns. After gluing, you can also use narrow strips of imitation damask paper up and down the edges, looks more elegant, very much like the ancient palace lanterns. If not too good at calligraphy and painting, there is a simple way to reference. Use a sheet of thin paper to trace the desired characters on the posters, and then overlap this sheet of thin paper and crimson rice paper together, with a single-edged blade to dig out the characters. Remove the thin paper, and the red rice paper appears to be skeletonized with the lettering. Use white rice paper to make the body of the lamp, red rice paper glued inside, candlelight or light reflected from the openwork, the effect is quite beautiful.　　The third step is to make the light source. If placed indoors, just need to light a regular candle in the lantern; if you want to carry out, it is best to use light bulbs and batteries to make a simple circuit --------------- cans handmade creative lanterns 1. prepare an empty can 2. grind the cap off the mouth of the bottle, it took about 10 or so minutes 3. look for a ruler and a knife, the first preliminary position to be cut 4. around the body of the bottle in a circle are Draw a good cut line, then you can cut, one by one to the original positioning line cut 5. cut the bottle pressed into the shape of a lantern hanging on the line well, this has been basically completed, go buy a candle, you can light a fire it