UV LED curing lamps and traditional high-pressure mercury lamp differences and advantages

1, UV LED point light source and the traditional high-pressure mercury lamp curing equipment differences

A: traditional UV mercury lamp curing machine produces UV light looks bright, high heat, in fact, it is a very wide spectrum, the real role in the effective curing of a certain ultraviolet spectral band only accounted for a part of the energy, a significant portion of the visible segment (stray light) and generate heat, the operator's eyes serious damage and easy to make the processing workpiece heat distortion. Serious damage to the operator's eyes and easy to make the processing workpiece thermal deformation.

B: LED UV curing machine, issued by a high-purity single-wavelength ultraviolet light, which belongs to the cold light source; the workpiece temperature rises only 3 degrees or so, the processed parts will not be deformed, and its energy is highly concentrated in the role of an effective curing of a certain ultraviolet spectral band, the actual use of the effect and light intensity of 1,000-2,000 mw of high-pressure mercury lamps curing effect is not comparable to the curing time is shortened to 0.5 to 5 seconds. The curing time is reduced to 0.5 to 5 seconds.

Environmental protection:

1, LED UV curing machine does not contain mercury, ozone-free, green, environmentally friendly, is the best choice to replace the traditional UV light source

2, the traditional UV mercury lamp curing oven contains mercury, ozone, environmental indicators are low

Heat effects:

1, LED UV curing machine cold light source without heat radiation, the carrier Surface temperature is low, a complete solution to the light quickly, liquid crystal production in the long-standing problem of thermal damage; especially suitable for liquid crystal sealing, film printing and other requirements of low-temperature occasions

2, the traditional UV mercury lamp curing machine heat is high, the bearer of high-temperature deformation

Ease of use:

1, the LED UV curing machine does not need to be warmed up, the instantaneous illumination, instantly reach 100% power ultraviolet (UV) output

2, the LED UV curing machine is not required to warm up, instantly light, instantly reach 100% power UV Output

2, the traditional UV mercury lamp warm-up time is long, a long time to reach the work requirements

Life:

1, the service life of the traditional UV curing machine is more than 10 times, about 20,000-25,000 hours;

2, the service life of the low UV mercury lamp service life of 800 hours to protect the

Energy:

LED UV curing machine, LED UV curing machine, LED UV curing machine, LED UV curing machine, UV curing machine, UV curing machine, UV curing machine, UV curing machine

1, LED UV curing machine high energy, stable light output, spot uniformity, improve quality

2, traditional UV mercury lamp curing machine wave width, spot to the surrounding diminishing, uneven

Structure

1, LED UV curing machine equipment, simple and easy to integrate the structure, can be customized

2, the traditional UV mercury lamp curing machine is large, complex structure. Complex structure

Operating factors

1, LED UV curing machine life is not affected by the number of switches

2, the traditional UV mercury lamp curing machine switching times affect the life

Costs

1, LED UV curing machine maintenance costs are zero, the use of LED UV furnace to save at least 10,000 yuan per year / Taiwan's consumable costs;

2, traditional UV mercury lamp curing machine regularly update lamps and other equipment, high cost