What are the specifications for making wooden doors? Complete collection of wooden door manufacturing specifications

As the saying goes, "amateurs watch the excitement, while experts watch the doorway." Many owners are easily fooled when discussing the problem of wooden door making with carpenters. So what are the specifications for making wooden doors? Next, I will bring you a complete set of wooden door production specifications, hoping to be helpful after reading it.

What are the specifications for making wooden doors?

Wooden door manufacturing specification 1, measurement data, whether doors and doorways are suitable:

Measure the thickness of the wall, the width and height of the door opening, and then measure the length of the top frame and the border of the finished door frame to see if it is suitable for the door opening.

Wooden door production specifications 2, check, model size direction is consistent:

Before the door frame and door are installed, check whether the model and size meet the requirements, and whether there are any angles, warpage, bending and splitting, and confirm the opening direction of the door frame and the cutting direction of the door frame installation.

Wooden door production specification 3, horizontal line control, whether the height is up to standard:

Control the installation height according to the indoor horizontal line 100cm, check the installation elevation size of the door frame according to the indoor horizontal elevation line, and deal with the structural edge that does not conform to the line.

Wooden door production specification 4, the installation is firm, whether the number of wooden bricks meets:

In order to ensure firm installation, check whether the number of embedded wooden bricks is satisfied in advance. At the entrance with a height of 1.2m~2m, 3 wooden bricks are embedded on each side, and at the entrance with a height of 2~3m, 4 wooden bricks are embedded on each side. Two nails with a length of 10cm should be nailed on each wooden brick, and the nail cap should be broken and nailed into the wooden door frame along the wood grain.

Wooden door production specification 5, door frame connection, concrete embedded is enough:

For the light partition wall with embedded concrete blocks of wood bricks connected to the door frame, the number of embedded concrete blocks depends on the number of wood bricks embedded in the height of the door and is nailed to the door frame (if other connection methods are adopted, it should meet the design requirements of the manual).

The above is the wooden door production specification brought by Bian Xiao. All the contents of the Complete Book of Wooden Door Manufacturing Specifications.