Handmade beaded teapot tutorial video

As follows:

Material preparation: teapot, rope.

Operating steps:

1. Prepare a rope and hang it on the pot.

2. Thread the right side of the rope into the handle of the pot.

3. Thread the left side of the rope into the pot handle.

4. Pull up the rope.

5. Go around both sides of the rope to the front.

6. Remove the cover from the car body and place it as shown in the figure. The lid is about 2 cm away from the spout.

7. Put the rope on the right in the middle.

8. Pass the left rope through the bottom of the middle part and tighten it.

9. Put the rope on the left in the middle.

10. Pass the correct rope through the bottom of the middle part and tighten it.

1 1, and repeat step 7- 1 1 to form a tether.

12, cut off the excess part of the rope, leaving about 0.5- 1cm.

13. Burn the rest with a lighter.

14, put the lid on the pot, and a teapot lid is ready!