How to install the pedal cymbal for drum set?

How to install the pedal cymbal for drum set is as follows:

1.First, remove the knob screw fitting.

2. Place the lower cymbal concave side up directly onto the stand.

3.Unscrew the nut on the knob screw fitting and remove one felt.

4.Insert the screw through the convex side of the upper cymbal.

5.Flip the upper cymbal over, put the removed nut and felt back on in turn, and screw it down to secure it.

6, the upper cymbal aligned with the bracket through, and the lower cymbal fit, tighten the knob, test sound can be.

Extended information

The maintenance of the drums:

1, many parts of the drums are metal, need to pay attention to waterproof moisture. Before assembling the drums should be wiped once, each time after playing the drums should also be wiped once, with a clean dry cloth. Wash your hands before playing the drums so that the oil or sweat on your hands does not erode the rubbers and make them lose their luster.

2. When storing and moving cymbals, put them in a special bag or case, and wear gloves when moving them.

3, the drumskin has been hit for a long time, it is easy to wear and tear, you need to replace the drumskin often, to maintain a good elasticity and feel.

Baidu Encyclopedia - Drums