How to install a glass screen Glass screen installation steps

Nowadays, home decoration is very like partition, glass partition in play a basic partition role at the same time, and will not affect the overall layout of the space and lighting, in the home decoration used more and more. Especially for small families, glass screens can not only divide the different functional areas, but also make the space look bigger, the following take a look at the installation steps of the glass screen!

First, the installation steps:

1. Glass partition installation - bullet line

According to the floor design elevation level line, along the wall height to the ceiling design elevation, along the wall bullet glass partition vertical elevation line, the horizontal line of the sky and the earth keel, in the sky and the earth keel on the horizontal line, planning a good keel staging position line, be sure to paint accurately, otherwise it will affect the later installation effect. Later installation effect.

2. Glass partition installation - ground bone

Fixed heaven and earth keel, if there is no design requirements, you can use Ф8-Ф12 expansion bolts or 3-5 inch nails fixed, expansion bolts fixed point spacing of 60-80cm. in addition, the installation of glass partition should be good before the anti-corrosion treatment.

3. Glass partition installation - the main keel

According to the design requirements, according to the location of the staging line to fix the main keel, fixed with 4-inch nails, the keel fixed at each end of the nails not less than three, if necessary, you can add a few appropriate.

4. Glass partition installation-installation of small keel

Installation of small keel, according to the position of the staging line to fix the small keel, the first use of fastening mortise and tenon or nails to fix. Before installing the small keel, you can also install the glass groove on the small keel according to the specifications of the installed glass.

5. Glass partition installation - glass

First find the corresponding type of glass specifications, and then installed in the small keel, if the use of pressure strip installation, the first fixed glass side of the pressure strip, and rubber pads, the first pad in the glass below, and then use the pressure strip to fix the glass.

If you use glass glue to fix the glass directly, you should install the glass first in the small keel of the reserved groove, and then use the glass glue to close the fixed, the use of glass glue, try not to get everywhere, or hands, it is difficult to clean up.

6. Glass partition installation - playing glass glue

On the glass along the surrounding paper tape, first of all, all kinds of glass glue evenly between the glass and the small keel, wait for a period of time, such as glass glue completely dry, tear off the paper tape.

7. Glass partition installation - installation of pressure strip

Need to various specifications of the material pressure strip, with straight nails or glass glue fixed on the small keel, fixed, one by one correspondence, do not connect the wrong location.

Second, the installation of notes

1, the size of the size must be accurate

Above you can see that the installation of glass partitions is the first task of positioning. Before the installation must be repeated on-site size proofreading to ensure that the location of the installation connection is accurate, not because of the size of the deviation caused by the larger impact.

2, the ground is flat

As we all know, the glass partition wall is fragile building materials products, so before installation, it is best to first will be first glass partition wall frame assembled on the ground level, can effectively protect the glass.

3, the frame glass does not shake

The installation process should pay close attention to whether the frame is tight. If the installation is not tight enough, it will lead to a reduction in the load-bearing capacity. In order to protect the frame glass of the overall weighing and stability, in the installation of the frame must pay attention to ensure that the overall frame can support each other, do not produce signs of shaking. In order to avoid the overall frame installation is not in place leading to problems in the later stage. If a large area partition needs to use hanging installation, it is more important to ensure that the fixture is solid and safe.

Third, the daily use of precautions

1, after the completion of the glass partition, do not always artificial weight, leaning, and usually pay attention to the use of cleaning, glass partition has one of the biggest advantages is good-looking, transparent, so if you do not pay attention to the cleaning of that does not reflect the advantages, so pay attention to cleaning.

2, glass partition is large and small homes can be used, and versatile, popular, so appropriate in the home design a glass partition is still very feasible!