What are the kitchen and bathroom decoration considerations?

1, the ceiling: because the bathroom is heavy water, so, choose those materials with waterproof, anti-corrosion, anti-rust characteristics.　

2, ground: before laying floor tiles, be sure to do a good job of waterproofing; after tiling, to ensure that the tile surface has a drainage slope (generally about 1% is appropriate), the slope toward the floor drain; ground after laying tiles must be done after the water closure test, the time at least to ensure that the 24 hours; paving floor tiles should be paid attention to the wall tiles through the joints, alignment, to ensure that the whole bathroom of the whole sense of unity.

3, wall: wall tiles should also do a good job of moisture-proof waterproofing, and tiling to ensure that flat, and to be with the floor tiles through the joints, aligned to ensure that the overall sense of the wall and the ground; if you meet the outlet of the water supply pipeline, tiles, tiles, the incision should be small, appropriate, easy to give the flange on the water supply unit to cover the incision, making the appearance of the perfect.

4, doors and windows: bathroom is best to have windows for ventilation; if there is no window, pay particular attention to the details of the door. In order to prevent the bathroom water to the outside, the door boundary should be slightly higher than the inside of the bathroom; bathroom door and ground clearance to stay a little larger, in order to facilitate the return wind; if it is a sliding door, but also in the sliding door and bathroom tiles to do a layer of waterproofing between the tiles.

5, circuit laying: bathroom wire joints must be hung tin, and should be successively wrapped in waterproof tape and insulating tape to ensure safety; wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location of electrical appliances depending on the size and location to ensure that the use of the convenience of a reasonable.

6, water transformation: bathroom drainage line is best not to make too many changes, if you want to change, according to the specific circumstances, such as different models of washing machines, the location of the water will be different.

7, sanitary ware installation: the best in the renovation before the water hole distance to remember, according to the size of the bathtub, bath room, toilet, sink and other sanitary ware, so as not to renovate the size of the inappropriate; toilet installation should be sealed with the toilet mud, and then use the expansion screws or glass adhesive fixing, so that, in the case of obstruction of the toilet is easy to repair.

8, ventilation: bathroom must have an exhaust fan, and the exhaust fan must be installed with a retrograde gate to prevent the backflow of dirty air.

Reference source; people's network - Wan Wan did not expect the wife's bathroom renovation into such a rely on this 9 strokes ah