How to quickly peel the skin off the juniper

In the trunk branches below the horizontal cut for a week, and then perpendicular to the d-shaped longitudinal cut, the length of the longitudinal cut according to the situation, the general longitudinal cut to the ground about 20 centimeters away from the horizontal cut for another week.

Cutting depth should be mastered to cut the bast, not damage the xylem. Then, with the tip of the knife will be longitudinal slit side of the bark pry up, with a hand while tearing, while prying, and at any time will be connected to the upper and lower skin cut, until all cut down until. In the process of peeling, do not touch the peeled trunk with your hands, knife, etc., and avoid other mechanical damage.

Expanded information

After ring peeling air humidity in more than 80%, the regeneration of new skin is favorable. Skin peeled down, immediately with transparent and film to peel parts of the package. The size of the film is wider than the actual length and circumference of the peeled parts. The intersection of the film should be tied tightly to avoid being dried by the wind. The upper and lower parts of the film with fine twine tied, the upper part to tie some tight, the lower part of the tie some loose.

It is best to do it in May-June, because this time there is more rain, the relative humidity of the air is larger, the temperature is generally more stable, the leaves of the juniper tree are all unfolded, it is the best time to peel the skin.