Installation steps of wooden keel ceiling

Before the wooden keel ceiling is carried out, it is necessary to accurately measure the position of the ceiling, because only when the position is determined and the ceiling is installed will it be visually comfortable.

Determine the ceiling position

First, raise the ceiling. After determining the installation height above the wall around the space, drill a hole on the top of the horizontal wall with an impact drill. The general bit size is1.2cm.. Note that in order to ensure the stability of the ceiling, the distance between holes should be kept at 30 cm. After the completion of the elevation of the wall, it is necessary to pull a line around the wall to facilitate the accurate position of the ceiling, so that the error will be controlled within 5 mm

Keel assembly

Before the ceiling, it is necessary to assemble wooden keel on the space ground, and the area is generally not more than 10 lining. In fact, the half-meditation method is to make a groove on the wooden keel and assemble the notches between the keels. Special glue should be evenly applied to the notch and fixed with nails.

Fixed keel

If assembled correctly, then we need to fix the wooden keel. Because the corners of the whole ceiling need to be sealed, this link is very important and cannot be sloppy.

Draw a position line

After the keel is fixed, it is necessary to draw the position line of the wooden keel, which is convenient to determine the number of tiles needed for the ceiling, and then determine the overall ceiling effect according to the number of tiles needed, but these aspects need to be considered.

♂? Installation construction

During the installation, the suspenders we installed should have good bearing capacity. When using the welding process, it needs to be more detailed, and the suspenders should be welded more evenly and look more beautiful. In addition, the ceiling should be rusted to make it more durable.

Correction work

Then the correction work, properly adjust the position of the primary and secondary keel of the ceiling to determine the rationality of the overall ceiling position. You can also move it appropriately to adjust the final overall effect of the ceiling. At this point, the wooden keel ceiling has been installed almost.