Hello, how to adjust the distance between lead pendant, float and hook when fishing?

The method of adjusting the distance between the plumb, the float and the hook when fishing: depending on the size of the fish, the distance is small and the sensitivity is high, while the distance is large and the sensitivity is low. There is also the higher the vigilance of ornamental fish, the greater the distance, and vice versa. It all depends on the specific situation.

Specific circumstances:

First row the float to a distance of 30 cm from the shot put 10, and throw it into the water to see how many meshes are exposed in the water at this time, and whether it is the mesh you want to adjust. If so, there is no need to add or subtract lead. If not, add or subtract lead appropriately.

For example, I took a No.2 crucian carp with jujube stones, and I want to catch some. The goal is to adjust 7 grids to capture 3 grids, with lead hanging, one hook touching the bottom and the other hook at the bottom. Then when I smoothed the float 30 cm away from the lead pendant and threw it into the water, it floated in the water for 4 meshes, which was 3 meshes different from the 7 meshes I wanted to adjust, indicating that the lead was heavy, the hook was lying at the bottom, and some lead skin was cut off.

If 1 1 mesh is exposed by floating in the water, there is a difference of 4 meshes from the 7 meshes I want to adjust, which means that the lead is light and the lead skin hook is suspended, so it is necessary to add or subtract some lead skin and adjust it until the surface is exposed to 7 meshes.

note:

1. You don't need to install a hook when adjusting the drift, because under normal circumstances, the weight of the hook and bait at the bottom of the water is borne by the bottom.

2. When waves float out of the water (caused by underwater undercurrent), the number of fish eyes is generally a little more, because undercurrent will make the float tilt with the lead.