Cutting method of sleeve insertion

The cutting method of sleeve insertion is as follows:

1. Draw the prototype cutting diagram of the garment. Draw the position of the insertion sleeve as shown in the drawing (the dotted line in the drawing is the half insertion sleeve).

2. The back piece is cut from the front piece, cut along the line.

3. The back piece has the same position as the front piece (the exact position can be determined according to the style), and is cut along the line.

4. After the front and back pieces are cut, cut the front piece of the sleeve as shown (the same for the back piece).

5, the following picture is the way to cut the suit collar.

6, the back piece of the same as above, cut along the line position.

7. Sleeves are the way to cut shirtsleeves (the picture is the front piece of the sleeve).

8. Put the front insertion sleeve part as shown in the picture.

9. It is important to note that you need to put the seam (leave the seam head).

10.This is the cut front sleeve piece.

11.This is the back piece, which is completed on the basis of the front piece.

12, follow the steps to complete the cutting of the sleeve.