Traditional Culture Encyclopedia - Traditional stories - Installation of wire tester

Installation of wire tester

a. Please confirm the power supply of the power supply, connected to the power supply for the AC115V or AC220V. (Please note that there is the use of 115V voltage);

b. Turn on the power supply, the system will carry out self-testing in the absence of a fixture state or to determine the status of the fixture (itself not insulated.) Good condition! Open or short circuit) in good condition, all the self-test shows OK. Problem 1: wire tester in the test of a longer wire harness will be misjudged

Solution: in the settings of the short circuit judgment value to adjust the value, jump to the specifications can be identified short circuit location, the specific value to be debugged.

Problem two: test the single side of the test is often encountered when the test is not precise enough, or the test is inaccurate split side

Solution: the adapter fixture in the middle of the line to shorten the adapter line is best for the following 15CM. The same is true for open-circuit split edge judgment. Shorten the adapter wires at both ends, so the accuracy will be much higher.

Problem three: in the debugging completely normal, found that the wire can not be automatically tested

Solution: test fixtures, the most common problem is the adapter fixture short circuit, you can pull out the test harness, test machine self-test, you can detect the adapter fixtures whether there is a problem.

Problem four: the wire harness with a large resistance test methods and problems encountered in the test process

Solution: If the wire harness with resistance, beyond the range of on-resistance. You can open the component test in the test item and go to component edit. Edit the resistor. Use the probe to find the point at the 2 end of the resistor and edit it in. Automatic learning. Can test, be careful in the process of testing the resistance of the most prone to error is the hand contact with the resistance. 1.USB file read and write;

2. and PC computer host on-line function;

Note: 1, the scope of the test wire: molding, unshaped wire

2, such as: USB cable, headphone cable, power cord, cell phone cable, network cable, cable, and so on; Wire Comprehensive Tester LX8986NC2

Wire comprehensive tester LX- 8986HV

Four-wire wire tester LX350

Wire Comprehensive Tester LX-8983N

Wire Comprehensive Tester LX8983HV

Wire Tester LX128D

Wire Electrical Automatic Tester LX-9809L

Wire Tester LX-8900L

Wire Tester LX- 8900L

Plugging and Unplugging Force Tester LX-8808

Plug Lead Bending Tester

Salt Spray Tester KH Series

Single and Dual Head Power Plug Cord Comprehensive Tester LX-221