Gigabyte motherboard B75DV3 can't access PE, and it gets stuck in the system interface every time. What happened?

If your Gigabyte motherboard B75DV3 can't access PE every time and gets stuck in the system interface, there may be the following reasons and solutions:

Operating system compatibility: First, please make sure that the PE you are using is compatible with your current operating system. For example, if you are using Windows 10 operating system, then try to use the corresponding version of PE.

Hardware failure: check whether there is a problem with the hardware. It may be a hardware component (such as memory stick, hard disk, graphics card, etc.). ) is damaged or does not work normally, which causes the system to fail to start normally. It is recommended to try the following steps:

Check the memory modules: Reseat the memory modules and make sure they are installed correctly.

Check the hard disk: Make sure the hard disk is well connected and free from physical damage.

Check other hardware: disconnect other external devices and expansion cards, and only keep the necessary devices for testing.

BIOS setting error: Check whether the BIOS setting is correct. Verify that the boot order is set to boot from the correct device (such as hard disk or USB flash drive) and that important boot options are not disabled.

Software conflict: some software may be incompatible with PE environment, resulting in the system being stuck after entering PE. Try to disable all unnecessary startup items and services at startup to eliminate software conflicts.

Update drivers: try to update the drivers of Gigabit motherboards, including chipset drivers and BIOS firmware. Go to official website, Gigabyte to download the latest version of the driver for installation.

Consulting technical support: If the problem still exists, it is recommended to contact technical support or seek professional help. They can diagnose problems more specifically and provide solutions.

Please note that before any operation, please back up important data to prevent data loss or damage.